Symbol - 3 KG
- Product Description:
Symbol is a series of mother-of-pearl additives, velvet-patterned, glossy appearance and pure acrylic-based, which creates fun and lively spaces.
Features:With its pearlescent structure, Symbol offers a special pearl-like semi-gloss and matte velvet look, and allows different pattern applications. With its water-based structure, it does not harm human health and the environment.
- Technical Data:
Density: 1.16± 0.02 (g / ml)
Consumption: 3,5-4 (m² / lt), 250-350 (g/m2)
Thinning Ratio: Ready to use.
Drying Time: 30-45 minutes to the touch; Dust free 1 hour; Full drying 24 hours
- Packaging:
10 kg, 3 kg 1 KG plastic bucket.
The application surface should be free of all kinds of dust, dirt and oil. After lightly sanding all the swollen and old painted surfaces, a clean, dry and solid surface should be obtained. If necessary, defects and cracks on the surface should be repaired with Acrylic Putty. If the surface to be applied is smoothed with gypsum plaster, Izolac should be used on the surface before Silicones matt application, Primer should be used on old painted, dirty or synthetic painted surfaces, and Putty Primer should be used on putty applied surfaces. Topcoat: Silicones matt in Symbol color is applied in one coat. It is applied to the surface with the help of a Symbol roller. The product is patterned with circular movements with the help of a special trowel before it completely dries on the surface. The surface is left to dry for 4-6 hours depending on the weather conditions. After the first coat has dried, the second coat of Symbol is applied with the help of a decorative trowel or roller to form a thin layer on the surface. After the application, without waiting for the surface to dry, the surface is patterned with circular movements with the help of a special trowel. After the application is over, the tools used should be cleaned with water immediately. Before the paint is used, it must be mixed until it becomes completely homogeneous. The ambient and surface temperature should be between +5ºC and +35ºC during the application and product drying period. If the application will be made on very glossy and glassy surfaces, the surface should be sanded first to create a solid surface in order to ensure better
Application Areas:
It can be applied to all old painted surfaces for which the floor has been prepared, interior surfaces such as concrete, plaster, concrete plaster, betopan, glass textile and paintable wallpaper.